CAPP 120 Introduction to Computers (Old Course: CIS 110)
3 semester credits
Lecture: 2 Hours; Lab: 2 Hours
Fall and Spring Semesters
A literacy-based approach is used to survey the computer and the computer industry. Topics covered include: Microcomputer applications, input, processor, output, auxiliary storage, file and database management, communications, information system life cycle, program development and systems software, and trends, issues and career opportunities in the computer industry. An opportunity for hands-on work with standard software packages including word processors, electronic spreadsheets, database systems, and graphics packages is presented in lab sections.
Explains how ropes, chains, hoists, loaders, and cranes are used to move material and equipment from one location to another on a job site. It describes inspection techniques and load-handling safety practices as well as reviews American National Standards Institute (ANSI) hand signals.
The student will gain knowledge and skills needed to produce drawings and understand basic drafting theory. Topics developed on the board will include sketching, lettering, instruments, scaling, applied geometry, orthographic projection, dimensioning, applied technical mathematical relations, primary auxiliary views, sections, threads, and weld symbols.
An introduction to basic concepts and terminology of electronics for the non-electronics major. Topics start with electricity and continue through everyday commercial and home applications.
A course designed to familiarize the student with proper safety practices and procedures. Course content will include protective clothing, handling of hazardous materials, OSHA regulations, workman’s compensation, and first aid. Also, safe practices in using hand and power tools, scaffolds and ladders, chains and cables, compressed gasses, proper storage of tools and chemicals, and handling of hazardous waste will also be addressed.
This course covers tools in the plumbing trade and how to use them: tools powered by electricity, batteries, and pressurized air, such as drills, saws, grinders, sanders, slings, hardware, hoists, rigging operations, critical safety issues, and accepted rigging techniques and practices.
This course introduces the history of plumbing from ancient times to current plumbing training programs, and also covers professional practices, career opportunities, and some basic safety. This course reviews the blueprints that are included in a building’s plans and then moves on to specific plumbing drawings, such as isometric and oblique pictorial drawings, orthographic drawings, and schematic drawings. It also covers drawings of fixtures, assembly drawings, and cutaway drawings. This course includes an application of plumbing math.
This course describes the various types of plastic piping and fittings, what each is used for, and the measuring, cutting, and joining techniques for each type; hangers and supports used with plastic pipe, various types of copper tubing and fittings, measuring, cutting, and joining techniques, two types of cast-iron pipe (hub and no-hub). This course also describes carbon steel pipe; an overview of the drain, waste, and vent (DWV) systems; basics of traps, drains, vents, DWV fittings, and clean outs and an overview of the water distribution system.
This course covers the various types of fixtures that plumbers install, including sinks and lavatories, bathtubs and showers, water closets and urinals, garbage disposals and dishwashers, and laundry trays and mop basins.
This course is a study of the State of Montana plumbing code as it regulates environmental sanitation for the protection of public health. It also includes a study of the materials and installation methods that require a minimum of service and maintenance.
PLMB 200 Pipe Fitting Tools and Motorized Equipment
3 semester credits
Lecture: 1 Hour; Lab: 4 Hours
Fall Semester
This course covers general hand tool safety and procedures for identifying, selecting, inspecting, using, and caring for pipe vises and stands, pipe wrenches, levels, pipe fabrication tools, and pipe bending and flaring tools.
PLMB 260 Introduction to Control Circuit Troubleshooting
2 semester credits
Lecture: 1 Hour; Lab: 2 Hours
Spring Semester
This course covers the operation, testing, and adjustment of conventional and electronic thermostats as well as the operation of common electrical and electronic circuits used to control HVAC systems.
This course covers operating principles, piping systems, and preventive maintenance pertaining to the servicing of boilers, chillers, chilled water systems, absorption systems, steam systems, and system traps.
An introductory course covering care and use of arc and oxyfuel, and gas metal arc (short circuit) welding equipment, regulators, torches, cylinders, power sources, electrodes, characteristics of operation, welding of steels and special applications. Introduction to techniques of welding mild steel. Mechanical properties of metals and types of joints are also covered.
WLDG 111 Welding Theory I Practical (Old Course: METL 140)
2 semester credits
Lab: 4 Hours
Fall and Spring Semesters
An introductory course covering care and use of arc, oxyfuel, and gas metal arc (short circuit) welding equipment, regulators, torches, cylinders, power sources, electrodes, characteristics of operation, welding of steels and special applications. Introduction to techniques of welding mild steel. Mechanical properties of metals and types of joints are also covered.
Introduction to the topics included on the Montana State Examination. Laboratory experience in basic mechanical and plumbing skills, identification, selection, operation, maintenance and repair of hardware and piping systems, and safety procedures commonly used by water or wastewater treatment plants. . The laboratory procedures are not the kinds of experiences that satisfy the laboratory science requirement. This course does not meet the laboratory science requirement.
Applied hydraulics including study of water and wastewater collection and distribution, maintenance, and safety. Includes lecture and laboratory hours, but the laboratory hours are not the kind of experience that satisfies the laboratory science requirement. This course does not meet the laboratory science requirement.
WLDG 180 Shielded Metal Arc Welding (Old Course: METL 150)
3 semester credits
Lecture: 1 Hour; Lab: 4 Hours
Spring Semester
A continuation of WLDG 110 and 111, additional training in welding horizontal, vertical, and overhead positions of mild steel. Emphasis is placed on alloys and special applications.
Prerequisite: WLDG 110 and 111 or consent of instructor. Course Fee: $50.00
This course is intended to meet the needs of Associate of Applied Science (A.A.S.) students and Certificate of Applied Science (C.A.S.) students who do not plan to transfer to other degree programs or institutions, Elementary Technical Writing is designed to introduce students to common forms of work related writing, such as memoranda, letters, reports, and proposals.
Students Please Note: This course may be used to satisfy degree and graduation requirements in Associate of Applied Science (A.A.S.) degrees and Certificate of Applied Science (C.A.S.) degrees; however, it cannot be used to satisfy any degree or graduation requirement for an Associate of Science, an Associate of Arts, a Bachelor of Arts, or a Bachelor of Science degree.
M 111 Technical Mathematics (Old Course: MAAS 106)
3 semester credits
This course is intended for AAS-degree students enrolled in vocational programs who are not planning to transfer to other degree programs or institutions. This course is a basic mathematics course for developing mathematics skills through introductory algebra as they relate to technical programs. This course includes measurement systems, use of measuring tools, as well as development of area and volume concepts with respect to technical applications.
STUDENTS PLEASE NOTE: This course may be used to satisfy degree and graduation requirements in Associate of Applied Science (A.A.S.) degrees. It can also be used as ‘free’ or ‘elective’ credits in a Bachelor of Applied Science (B.A.S.) degree; but it cannot be used to satisfy any other requirements for a B.A.S. degree. It cannot be used to satisfy any degree or graduation requirements for an associate of science, an associate of arts, a Bachelor of Arts or a Bachelor of Science degree.
A study and utilization of the principles and techniques of oral communication. Problems of research, preparation, content, organization, argument, and delivery are examined.
Meets MSU-Northern General Education Core Communication (CAT I) requirement. Montana University System Core Course
Print this page
Program Fee: $175.00/semester 
Course Fee: $5.00
Meets MSU-Northern General Education Core Technology (CAT VII) requirement. 
Prerequisite: IT 111
Montana University System Core Course
Top of page