ATDI 134 Auto/Diesel Electrical/Electronic Systems I
4 semester credits
Lecture: 2 Hours; Lab 4 Hours
Fall and Spring Semesters
This is a course in the study of electrical/electronic fundamentals applied to automotive and commercial vehicle systems. It includes theory, design, diagnosis, and repair of wiring and circuits, batteries, alternators, and starters. The use of test instruments and electrical troubleshooting manuals currently recommended by industry will be emphasized. Ohms law and circuit analysis, as it applies to industry will also be examined. Students will fulfill computation requirements for Certificate of Applied Science and Associate of Applied Science by completing this course.
A course in automatic transmissions including lecture, demonstration, and student participation in disassembling and reassembling of selected transmissions for the purpose of understanding the function, construction, operation, servicing, and troubleshooting procedures.
Prerequisite: AUTO 117 or DIES 216 Course Fee: $20.00
ATDI 264 Auto/Diesel Electrical/Electronic Systems II
4 semester credits
Lecture: 2 Hours; Lab: 4 Hours
Fall and Spring Semesters
This course is a continuation of the study of electrical/electronic systems in use on current automotive and heavy equipment. The course will study industry recommended diagnostic and repair procedures, charging and cranking systems, ignition systems, power accessories, and an introduction to microprocessor-based engine, powertrains, and brake/suspension control systems. Students will fulfill communication requirements for Certificate of Applied Science and Associate of Applied Science by completing the course.
CAPP 120 Introduction to Computers (Old Course: CIS 110)
3 semester credits
Lecture: 2 Hours; Lab: 2 Hours
Fall and Spring Semesters
A literacy-based approach is used to survey the computer and the computer industry. Topics covered include: Microcomputer applications, input, processor, output, auxiliary storage, file and database management, communications, information system life cycle, program development and systems software, and trends, issues and career opportunities in the computer industry. An opportunity for hands-on work with standard software packages including word processors, electronic spreadsheets, database systems, and graphics packages is presented in lab sections.
Construction, operation, and repair of diesel engines; logical steps of procedure for engine reconditioning; installing and timing of fuel injection components. Emphasis will be placed on diesel engine component reconditioning, engine tune-ups, and use of special diagnostic tools.
This course will give the student hands-on experience rebuilding diesel engines and components. The student will learn manufacturer’s procedures on engine rebuilding and special tool usage.
To be taken concurrently with DIES 104 Course Fee: $20.00
This is an introductory lab in diesel fuel injection systems. This lab will include the identification, disassembly, assembly, troubleshooting, repair, and adjustment of the following fuel systems components: Inline pumps, distributor pumps, Cummins fuel system, unit injectors, and injectors.
DIES 214 Introduction to Hydraulics and Pneumatics Lab
2 semester credits
Lab: 4 Hours
Fall Semester
Application of hydraulics and pneumatics. Students will demonstrate hydraulic principles on live work stations. They will work with, tear down, and assemble equipment. They will also work on open and closed center systems, fixed and variable displacement pumps, linear and rotary actuators, pressure and flow controls, and directional valves.
To be taken concurrently with DIES 204 Course Fee: $15.00
This course will give the students hands-on experience working on heavy duty power train components. Emphasis will be placed on calculating gear ratios and power flow on industry’s common transmissions, final drives, and clutches. The student will measure drive line angles and diagnose vibration complaints.
A course dealing with braking systems, suspensions, and alignment of medium and heavy duty vehicles. The major emphasis will be on air brakes, methods used to check and adjust alignment, and inspection and repair methods for suspension systems.
This course will include engine assembly and engine start-up after assembly. The course will also coordinate set-up, testing, and diagnosis of engine problems using test instruments and engine dynometer.
To be taken concurrently with DIES 272 Prerequisites: DIES 104 and DIES 114
This course will give the student hands-on experience on diagnosing diesel engines using the proper test equipment. Diesel engine repair and assembly are addressed.
To be taken concurrently with DIES 262 Course Fee: $20.00
A course emphasizing actual shop operations: Long- and shortterm jobs covering all aspects of a vehicle. It also includes vehicle maintenance, shop flat-rate procedures, work order and warranty claim procedures.
Prerequisites: DIES 262 and DIES 272 Course Fee: $20.00
An introductory course covering care and use of arc and oxyfuel welding equipment, regulators, torches, cylinders, power sources, electrodes, characteristics of operation, welding of steels and special applications. Introduction to techniques of welding mild steel. Mechanical properties of metals and types of joints are also covered.
This course is intended to meet the needs of Associate of Applied Science (A.A.S.) students and Certificate of Applied Science (C.A.S.) students who do not plan to transfer to other degree programs or institutions, Elementary Technical Writing is designed to introduce students to common forms of work related writing, such as memoranda, letters, reports, and proposals.
Students Please Note: This course may be used to satisfy degree and graduation requirements in Associate of Applied Science (A.A.S.) degrees and Certificate of Applied Science (C.A.S.) degrees; however, it cannot be used to satisfy any degree or graduation requirement for an Associate of Science, an Associate of Arts, a Bachelor of Arts, or a Bachelor of Science degree.
M 111 Technical Mathematics (Old Course: MAAS 106)
3 semester credits
This course is intended for AAS-degree students enrolled in vocational programs who are not planning to transfer to other degree programs or institutions. This course is a basic mathematics course for developing mathematics skills through introductory algebra as they relate to technical programs. This course includes measurement systems, use of measuring tools, as well as development of area and volume concepts with respect to technical applications.
STUDENTS PLEASE NOTE: This course may be used to satisfy degree and graduation requirements in Associate of Applied Science (A.A.S.) degrees. It can also be used as ‘free’ or ‘elective’ credits in a Bachelor of Applied Science (B.A.S.) degree; but it cannot be used to satisfy any other requirements for a B.A.S. degree. It cannot be used to satisfy any degree or graduation requirements for an associate of science, an associate of arts, a Bachelor of Arts or a Bachelor of Science degree.
This course surveys a wide variety of topics including: properties and theorems of the real and complex number systems, the function concept including inverse functions, graphing techniques, linear, quadratic, polynomial, exponential, and logarithmic functions, solving systems of equations in two or more variables using matrices, determinants, and matrix algebra. The development of problem solving skills is emphasized.
Prerequisite: M 095 Meets MSU-Northern General Education Core Mathematics (CAT II) requirement. Montana University System Core Course
M 145 Math for the Liberal Arts (Old Course: MATH 110)
4 semester credits
This course surveys a wide variety of topics including sets and logic, mathematical patterns, number systems, number theory, algebra, geometry, probability and statistics. The development of problem solving skills is emphasized.
Prerequisite: M 111 or M 095, or ACT scores 20 - 22, or university placement examination Meets MSU-Northern General Education Core Mathematics (CAT II) requirement. Montana University System Core Course
A study and utilization of the principles and techniques of oral communication. Problems of research, preparation, content, organization, argument, and delivery are examined.
Meets MSU-Northern General Education Core Communication (CAT I) requirement. Montana University System Core Course